- Size Guide
- Additional information
- Reviews (1)
NexGen Stage Floor leveling kit
NexGen levelling pillars, can be used on any dry surface indoor and outdoor. This staging pillar system allows you to take your staging outside and use on grass, car-parks, concrete and cobbles.
The system should be used in dry condition, as the staging platforms need to remain dry.
The system is very easy to use, and each pillar is height adjustable from 115mm to 165mm high. The pillars can also take out up to 10 degree floor gradients. Bridging a small step, curb or paving ridge is possible below 50mm high.
If you already have a stage system with riser node block feet, our system will work with your staging too.
The pillars work by placing them underneath the riser legs, each riser leg node must be supported, and each of the floor levelling pillars can accept 4 riser leg blocks.
The minimum area you should use with this kit is 2 metre x 2 metre and larger. The system should be used with only flat stages to provide a secure and no slip structure.
Safety precautions should be used to comply with your own risk assessment. Every effort should be made to level each individual pillar and stage module, supporting the stage to make sure, there are no trip hazards or slip hazards.
Made of toughened plastic, these robust pillars are waterproof, but if used on grass it should be dry.
|Dimensions||40 × 40 × 20 cm|
Large, Medium, Small